|
I was very excited to receive a package today! It looked suspiciously like it came from LOR. 
So, I opened it up and sure enough...it is. I ruffled through the peanuts and found 
The first box is the USB boster, and the second box is an eight channel LOR controller. I removed the boxes and shuffled through more peanuts. However, all I found were dumb manuals. Bah! ;-) The manuals were the last thing on my mind, but they will come in handy later. 
Time to dig deeper into the box. 
AHA! I knew my 16 channel controllers were hiding in there somewhere. I pulled out those boxes and the cords started to appear. 
After pulling out all the cords, I surveyed my inventory.   
Cool! So everything arrived OK. Time to check out the boards.  
 
And I hooked up the 8 channel board.
  You may notice the power cords are missing...I added those later. And the grounds are tied up so they don't flip around to the back of the board and cause a short. This will be fixed when my enclosure gets in. I am very excited to own my first LOR controllers! Needless to say, I hooked it up and played my sequences over and over and over again. Such fun!
Window Project Home
Window Project Full Blog Newest First
Window Project Full Blog Oldest First
Window Project Entries by Table |
